Siplace / Siemens HS-60 SMT Placement

Siplace / Siemens HS-60 ID: 5453

Siplace / Siemens HS-60 {ID: 5453}

60,000cph! Excellent condition.
CEE ID: 5453
Status: Sold
Model: HS-60
Vendor: Siplace / Siemens
DOM: 06/05
Condition: Inline with its age
Cycles: 71M
Facilities: 110/208V 3ph, 30A per ph, 100psi@34cfm
Dims: 3500kg



Station configuration Includes:
Four Independent X I Y gantries with a 12 nozzle revolver head on each
Four feeder changeover tables
Four automatic waste tape cutters
One five section conveyor with automatic width control
One station computer with two touch screen monitors and keyboards
Two vision processors with four fiducial cameras, four component cameras, and programmable Illumination
One Service Box
Adaptive pickup offset correction
Adaptive PCB warpage correction
Programmable component placement force
Graphical User Interface
 
110V Retro Kit
Adapterbox SMEMA-Siemens for HS·XX
Twenty Magnetic Support Pins (per machine)
CSAoption
 
Options:
Nozzle Changers: Set of nozzle changers RV Head HS-XX
Transport Options: Dual Lane, fixed conveyor rail, right side
Transport Height: 950 mm
Air Filter Box
PCB Barcodereader HS-XX I HF 1D
Mounting Kit Barcode Reader HS-XX
Splice Detection Table Controller
SIPLACE HS-series is the SIPLACE placement machine with a turbocharger.  Its performance of up to 60,000 components per hour makes the SIPLACE HS-series the industry standard in the high-end placement field. The machine achieves this performance despite its footprint of less than seven square meters. The SIPLACE HS-series places faster and thus more profitably than comparable machines on the market.
 
Constant top performance.
The SIPLACE HS features four vertical placement heads that rotate around a horizontal axis.  The revolver heads operate alternately, allowing circuit boards to be processed without interruption. Thanks to its highperformance
heads and high acceleration, the machine's performance of 60,000 components per hour is without parallel.
 
The system can place components that range from ICs of 18.7 x 18.7 mm to 0201 chips, flip-chips, µBGAs and CSPs, and even 01005 components.
 
With its linear drive, the SIPLACE HS achieves impressive accuracy: 75 µm at 4 sigma. By adding the corresponding modules, you can increase the throughput to 120,000, 180,000 or more components per hour.
 
Widest component spectrum.
The SIPLACE HS can place 0201 chips and other components quickly and precisely, and is suitable for mass-processing of flip-chips. It features more flexibility, a much wider component spectrum, and clearly superior production quality than its competitors.
 
Less unproductive downtime.
Thanks to a series of exceptional innovations, the SIPLACE HS operates much more quickly and effectively than comparable machines in the same market segment. It also cuts down on unproductive downtime.
● Shorter revolver head cycle times
● Short ink spot and fiducial detection times
● Short placement head travel times due to linear-drive technology
● Reduced PCB travel times due to improved PCB transport
● Feeder tables for fastest changeover
SIPLACE HS-60 Placement Station
Performance Specification
Placement rate: 60,000 cph
Placement accuracy: +/- 0.080mm@ 4 sigma
Component sizes: up to 19.0mm x 19.0mm (0201 chips to PLCC44)
PCB Dimms (Single conveyor): 50 x 50mm to 368 x 460mm /
2"x2" to 14.5"x18"
● PCB Dimms (Dual Conveyor): 50x50mm to 368x216mm /
2"x2" to 14.5"x8.5"
Feeder slots for up to 144 8mm tapes
Feeder types: tape, bulkcase
 
Facilities Requirements:
Power. 208V 3 phase, 30A per phase, 10KW
Air. 100psi @ 34cfm
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional for your live or video acceptance. If you require special acceptance criteria, please discuss this with your CEE sales agent. Availability is subject to prior sale.



Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.