Siplace / Siemens S-27 HM (12-12) SMT Placement

Siplace / Siemens S-27 HM (12-12) ID: 5454

Siplace / Siemens S-27 HM (12-12) {ID: 5454}

Flexible and fast, compact high quality smt placer.
CEE ID: 5454
Status: Sold
Model: S-27 HM (12-12)
Vendor: Siplace / Siemens
DOM: 06/05
Condition: Inline with its age
Cycles: 90M
Facilities: 208V 3ph, 18A per ph & 85psi @ 15cfm

Station configuration includes:
Two Independent X I Y gantries with a 12 nozzle revolver head on each
Change-over table mobile 1
Change-over table mobile 2
Feeder Safety Interlock Table 1
Feeder Safety Interlock Table 2
Two automatic waste tape cutters
One three section conveyor with automatic width control
One station computer with touch screen monitor and keyboard
One vision processor with two fiducial cameras, two component cameras, and programmable Illumination
One Service Box
Adaptive pickup offset correction
Adaptive PCB warpage correction
Programmable component placement force
Graphical User Interface
Nozzle Changers: Nozzle-Changer for 12 RV Head Gantry 1 & 2
Transport:  Dual Lane, fixed conveyor rail, right side
PCB Barcode Mounting Kit
PCB Barcode Reader
SMEMA Interface
Twelve magnetic support pins (per machine)
Documentation (CD-ROM)
The high-speed SMD placement system SIPLACE S-27 HM combines high placement speed with flexibility and accuracy. In contrast to classic chipshooters, a Collect & Place procedure is applied here.  SIPLACE S-27 HM placement machines are equipped with two X/Ymain gantries. Each gantry features a star-shaped Collect & Place
placement head with either 12 or 6 nozzles.
The placement heads alternately pick up components from the stationary component feeder and place components on the PCB which is also motionless. This has distinct advantages:
Component tapes of all sizes can be replenished by splicing a new reel of components to the end of a depleting reel. This eliminates machine stoppage due to component replenishment.
Stationary, vibration-free feeders ensure a reliable pick-up of even the smallest components (e.g., 0201 and 0402 chips).
Thanks to the flexible Collect & Place Heads – whose ideal nozzle set-up is automatically specified – the path can be minimized and the sequence of placement optimally adjusted.
Populating a stationary PCB also prevents components from shifting during placement.  Speed coupled with economic efficiency and set-up reliability is the SIPLACE S-27 HM recipe for success.  The first components are already being picked up while the PCB is being moved in. While one Collect & Place Head is placing components, the other one is picking components up. The product capability is enhanced by optional add-on features such as component bar code scanner, automatic nozzle changer or changeover tables which can be set up outside the machine and exchanged in a matter of minutes.
Additional changeover tables enables the reduction of job setup time increasing machine utilization.
Dual Conveyor eliminates the non-productive PCB loading times thus increasing machines operating efficiency.
Automatic nozzle changers for both changeover and storage of nozzles.
PCB Barcode Reader used for product controlled production changeover.
Component Bar Code Scanner used for feeder set-up verification.
SIPLACE 5-27 HM Placement Station
Perforrnance Specification
Placement rate: 27,000 cph
12 Nozzle Revolver Head Gantry 1
Placement accuracy: +/- 0.090mm @ 4 sigma
Component sizes: up to 19.0mm x 19.0mm (0201 to PLCC44)
12 Nozzle Revolver Head Gantry 2
Placement accuracy: +/· 0.090mm @ 4 sigma
Component sizes: up to 19.0mm x 19.0mm (0201 to PLCC44)
Transport height 950mm
Feeder slots for up to 118 8mm tapes
Feeder types: tape, stick, bulkcase, matrix tray
PCB dims (Single conveyor): 50x50mm to 495x460mm / 2"x2" to 19.5"x18"
PCB dims (Dual conveyor): 50x50 mm to 495x216mm /2"x2" to 19.5"x8.5"
Facilities Requirements:
Power: 208V 3 phase, 18A per phase, 5KW
Air: 85psl @ 15cfm
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional for your live or video acceptance. If you require special acceptance criteria, please discuss this with your CEE sales agent. Availability is subject to prior sale.


Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.