Smart Sonic 4200 Stencil Cleaner

Smart Sonic 4200 ID: 5455

Smart Sonic 4200 {ID: 5455}

Automatic System with separate rinse/dry chamber.
CEE ID: 5455
Status: Sold
Model: 4200
Vendor: Smart Sonic
Condition: Inline with its age
Facilities: 208V, 3ph, 25amp: water 40psi, air 100psi
Dims: 64"x50"x48"



At the touch of the dial start buttons, the Model 4200 automatically lowers the stencil into the wash tank.  The ultrasonic wash is completed in approximately one minute.  The stencil is spray-rinsed as it lifts out of the wash tank to its original starting position.  
 
The SmartSonic process cleans faster and more effectively than any kind of solvent and is completely environmentally safe.  Even California's Air quality Management District gives our process complete exemption status from any permit requirement because it has absolutely no environmental impact.  
 
SmartSonic is not only environmentally safe, it is also the safest way for your personnel to clean.  There is not hot water to scald personnel, the are no hazardous vapors to breathe, there is no explosion or combustible concerns that are inherent with alcohol and terpene systems (an ignition spark can be creaster if fixturing fails and whirling metal spray nozzles strike the metal stencil).
 
SmartSonic is also the most economical way to clean.  The 440-R is diluted to a 10% concentration with water and needs to be changed only once per week, no matter how many stencil and cleaned.
 
The SmartSonic Cleaning Process is not only the best possible was to clean solder paste, our customers tell us that it is also the best way to clean wet SMD adhesives, flux residue buildup, and hybrid inks from screen, stencils, misprints, and tooling.
Operation Modes:
Automatic, PLC Control, Separate tank for rinsing and ariknife drying
 
Water Req:
<1 gallon
 
Average Cycle (seconds):
<240 for OA paste
<270 for RMA & No-clean
(includes dry time)
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional for your live or video acceptance. If you require special acceptance criteria, please discuss this with your CEE sales agent. Availability is subject to prior sale.



Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.