Speedline Omni 7 Reflow Oven

Speedline Omni 7 ID: 5446

Speedline Omni 7 {ID: 5446}

Well maintained, 7 zone reflow oven.
CEE ID: 5446
Status: Sold
Model: Omni 7
Vendor: Speedline
DOM: 4/00
Condition: Inline with its age
Facilities: 480V 3ph 82KVA
Dims: 212"x56"x"50" @ 4000lbs

● Left to right
● Edge/mesh
● air cooled
● chain oilers
 ● auto hood lift
Each Omni model features the same design criteria and the same robust construction. Our central design theme is to minimize the number of parts in the machine and make structural components serve multiple functions. Omni's tunnel is based on custom extrusions, which serve as support members, wireways for thermocouples, hardware attachment, and nitrogen plumbing. This critical design element eliminates separate tunnel supports, copper plumbing and the need to drill and tap rails for hardware. Because of its unique design, Omni can be produced in different lengths and number of zones for a full range of systems competitively priced to meet any process need.
The initial cost of a reflow system is only a small part of the overall cost in production. Factor in mean time between failure (MTBF), mean time to repair (MTTR), product yields, nitrogen consumption and downtime for scheduled maintenance, and the true cost of ownership can skyrocket. The Omni series is designed to have the lowest possible cost for each of these factors. Many subsystems of the Omni maintain themselves. Those requiring periodic attention feature excellent accessibility. The Omni reflow oven even has the ability to main¬tain the cooling system without the wait of cooling down. High performance, reliability and cost effectiveness need not be mutually exclusive. The Omni series proves it!
> Low cost of ownership
> High MTBF (mean time between failures)
> Low MTTR (mean time to repair)
> Windows operating system
> Separate access to cooling and heating zones
> Field upgradable for N2
> Double clamshell hood for complete access
> Hinged, removable corner panels
> Lift-off front panels
> Heavy duty hood actuator with fail-safe clutch
> Gasket mounted blower motors
> Custom extrusion tunnel design
> Solid cast aluminum heater panels
> Custom conveyor extrusion with internal chain return
> Semiautomatic chain oilers
> Precision linear cross-shafts
> Low gas consumption
> SMEMA interface available
> UL inspected and listed
> CE compliant
Solid cast aluminum heater panels ensure exceptional temperature uniformity. Large thermal mass ensures oven stability and tight process control. Easy access enables heater change out, top or bottom, in less than 10 minutes.
Custom cast blower manifolds increase blower efficiency. Blowers are rated at 160 CFM (272 m3/hr) in each zone, top and bottom, and 320 CFM (544 m3/hr) in reflow (spike) zones.
OmniFlo's software alerts when chain lubrication is required.  Semiautomatic oilers dispense
a precise flow of lubricant to the inside of the chains.
Gasket mounts and quick disconnect at each motor provide ease of maintenance and low MTTR. Self-cooling motors with thermal overload protection and software integrated failure detection increase reliability.
Machine Length:                               212″ (5384.8 mm)  
Machine Width:                                 56.3″ (1430.4 mm)  
Machine Height:                                49.8″ (1265.4 mm)  
Process Width:                                  20″ (508 mm)  
Heated Length:                                  104.5″ (2654 mm)
Cooling Length:                                  45″ (1143 mm)
Operating Temperature:                     350°C with rails
Compliance Requirement:                 CE/UL listing CE/UL listing
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional for your live or video acceptance. If you require special acceptance criteria, please discuss this with your CEE sales agent. Availability is subject to prior sale.


Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.