Universal AdVantis AC-72 SMT Placement

Universal AdVantis AC-72 ID: 5341

Universal AdVantis AC-72 {ID: 5341}

Entire component range capability, 20kcph speed, superior reliability, and easy programmability
CEE ID: 5341
Status: Sold
Model: AdVantis AC-72
Vendor: Universal
DOM: 2005
Condition: Superior to inline with its age
Facilities: 200-240VAC, 3ph & 3CFM @ 90psi
Dims: 66" x 66.5" x 87.1" @ 5,700lbs



* 72 Feeder slots (144 with dual lane feeders)
* FlexJet - 7 spindle head w/ 2.6mpp on-the-head camera
* UPS+ windows s/w with upgraded VME  6.0.4
* Board support
* 24/42V feeder interface
* NPI (new product introduction) software
* can be retrofited with a ULC camera by CEE if required
 
Universal’s AdVantis platform is a high-speed modular mounter, specifically engineered for application flexibility and long-term reliability. The AdVantis is cost-effective and is perfectly suited to the production environments of today’s manufacturers.
 
The AdVantis is specifically designed to provide:
   ● Superior throughput
   ● High pick performance
   ● Fewer maintenance requirements
   ● Ease of use
   ● Rapid Changeover
   ● Superior New Product Introduction
 
Consistent with the original platform concept, the AdVantis employs common mechanical, electrical, and software interfaces that allow Universal to develop options (heads, cameras, feeders, etc.) in response to changing production demands.
 
Many options developed for original GSM Platforms are still compatible with the AdVantis. The AdVantis uses the exact machine length and similar locations for air and power connections to simplify migration and reduce installation expenses.
 
PrecisionPro Feeder Interfaces
The AdVantis platform includes the PrecisionPro Feeder Interface for PrecisionPro Tape feeders, and feeder bank change support. The PrecisionPro Feeder interface incorporates the following features:
   ● 3-Point registration of 8mm and 12mm for improved pick performance when using PrecisionPro tape feeders
   ● 42V DC drive voltage for faster index rate of PrecisionPro tape feeders and increased throughput
   ● Self-ID control of PrecisionPro tape feeders with feeder serial number, cycle count tracking, and the ability to support multiple tape inputs in a single slot
   ● Support for PrecisionPro tape feeders, Electric tape feeders, and all previous generation Multi-pitch and Pneumatic tape feeders. Note: 24V Transformer kit required to operate Multi-pitch feeders
   ● Support for 18-slot Feeder Banks
   ● All PrecisionPro feeders are splice compatible, and are available with an option that detects when a reel has been removed, thus requiring the barcode on the new reel be scanned to ensure that the correct reel has been spliced.
   ● Dual Track 8mm PrecisionPro feeders do not need to be removed from the machine for removal of Mylar.
 
UPS+ (Universal Platform Software +)
   ● Graphic user interface with user configurable icons and machine status
   ● Graphical pattern programming tools with spreadsheet–style data entry
   ● Networked component, nozzle, fiducial and feeder databases
   ● User-configurable optimization aid
   ● Offline/Online Simulation tool for indicating expected machine/line performance for a given product
   ● Comprehensive data import/export
   ● Powerful query tools
   ● Programmable feeder templates for developing common feeder setups
   ● On-the-fly vision inspection, using cutting-edge ESI vision engine technology and algorithms
   ● Automatic Pick Update and Automatic Z Update at Pick and Place increases pick yields and outgoing board quality, while improving overall machine reliability and increases intrinsic availability.
   ● Automatic Pick Update increases pick yields and outgoing board quality, while improving overall machine reliability and increases intrinsic availability.
   ● Powerful NPI tools that allow on-the-fly editing of component descriptions and product data, simplifying component and board programming by teaching images allowing on-the-fly editing
   ● Powerful diagnostic and manual axis control tools
   ● Online documentation
 
FlexJet Placement Head
Universal’s FlexJet placement head offers a mix of flexibility and speed for many surface mount applications. The head delivers highspeed small part placement of 0201’s to 24mm square components. It uses seven on-the-head cameras to inspect components during travel to the PCB.
 
For parts over 24mm square, the customer must employ a stationary upward looking camera. When using the upward looking camera, images are captured on the fly, as the head travels over the camera.
 
The FlexJet head provides great application flexibility. It accommodates component thickness with a range of 0.15mm up to 11.68mm utilizing the on-the-head camera, and up to 25mm tall when utilizing the upward looking camera. In addition, it delivers from 150grams up to 1000grams of placement force.
Board Specifications
   ● Length: Min[50.8mm (2”)] Max[508mm (20”)]
   ● Width: Min[50.8mm (2”)] Max[457mm (18”)]
   ● Thickness: Min[0.508mm (.02”)] Max[5.08mm (.2”)]
   ● Weight: 2.72kg (6lbs)
 
Board Clearance
   ● Topside Clearance: 25.4mm (1.00”)
   ● Bottom Side Clearance: 25.4mm (1.00”)
 
Component Handling Capabilities
Maximum (without theta rotation in the camera housing)
   ● Length: 24.00mm
   ● Width:  24.00mm
   ● Height: 11.68mm
Maximum (with theta rotation in the camera housing)
   ● Length: 17.96mm
   ● Width:  17.96mm
   ● Height: 11.68mm
Minimum
   ● Length: 0.38mm
   ● Width:  0.19mm
   ● Height: 0.15mm
 
Maximum Machine Speed (AX-72)
   ● cph: 19,300
   ● X/Y Spec Limits (um): 75
   ● Min Cpk: 1.33
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional for your live or video acceptance. If you require special acceptance criteria, please discuss this with your CEE sales agent. Availability is subject to prior sale.



Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.